Length × Width × Height: 343×294×941mm Newly Upgraded
| Injection Molding Machine Installation Dimension | 115x115mm |
| Standard Voltage | AC 220V/2P+PE/50Hz |
| Conveying Capacity | 50 - 70 kg/h |
| Air Pressure Requirement | 0.5-0.6 MPa |
| Overall Height (Standard Model) | 941mm (↓16mm) |
| Standard Model Power | 240w (↑ Upgraded) |
| Dual Material / Dual Color Model Power | 280w (↑ Upgraded) |
| Dual Material Model Dimension | 343×540×941mm |
| Dual Color Model Dimension | 343×540×941mm |
| Appearance Design | Brand New White Body |
| Applicable Models | M/M-S/M-U/M-SU/M-T/M-ST/M-D/M-SD/M-F/M-SF |
| Differences from 4th Generation | Lower height & higher power |
Standard M Series (5th Gen ICOLOR 5, New Generation) | Mounting Port: 115×115 mm | Conveying Capacity: 50-70 kg/h
Dual-speed switchable with large/small gears, covering the full range of low to high dosing ratios for color matching, with fixed powder output per gear tooth.
Dual alarm modes of voice and flashing lights, covering three major fault scenarios: material shortage, motor abnormality and cylinder failure, ensuring uninterrupted production.
Equipped with a 1:10 reduction ratio, delivering a stable output speed of 135 r/min for uniform and consistent mixing. The large-capacity material storage chamber ensures sufficient and continuous material supply.
Cylinders and solenoid valves adopt original AIRTAC (Taiwan) parts, working within 0.5–0.6 MPa air pressure, featuring precise operation and long service life.
Supports standard AC220V power supply for direct installation above injection molding machines; mounting opening size: 155×155 mm for L model, 115×115 mm for M model.
The 5th-generation model features a brand-new appearance design. The overall machine height is optimized to 941 mm, and the standard model power is upgraded to 240W for stronger comprehensive performance.
| Num | Function/Protection Project | Content Description |
|---|---|---|
| 1 | Material Shortage Detection | The 5th-generation model comes with a brand-new appearance design. The overall height is optimized to 941 mm, and the power of the standard version is upgraded to 240W for stronger performance. |
| 2 | Color Powder Motor Abnormal Alarm | When the color powder motor malfunctions or the internal counter is abnormal, the system will trigger an instant voice alarm and stop relevant operations to protect the motor and transmission system. |
| 3 | Discharging Cylinder Abnormal Alarm | A voice alarm will be activated if the discharging slide plate fails to open fully or the material sensor switch malfunctions, preventing material blockage or feeding interruption caused by cylinder faults. |
| 4 | Low Color Powder Level Alarm (Optional) | When the material level of the color powder barrel drops below the preset threshold, the system will alert with flashing lights to avoid uneven product color due to color powder shortage during batching. |
| Num | Part Name | Brand/Description | Place of Origin |
|---|---|---|---|
| 1 | Gear Reduction Motor | Customized by Shuoxiang Technology, specially optimized for iColor 4/5 series. | Made in China |
| 2 | Control System | Custom developed by Shuoxiang Technology, with exclusive control logic and customized PCB board. | Control System |
| 3 | Cylinder | AIRTAC · Precision Pneumatic Components | Made in Taiwan, China |
| 4 | Solenoid Valve | AIRTAC · High-Frequency Switch Solenoid Valve | Made in Taiwan, China |
ICOLOR5 M Standard (5th Generation) New Generation · Full Range Model | |
| Gross Weight | 33kg |
| Net Weight | 31kg |
| Package Dimension (L × W × H) | 750x480x440 mm |
Dual Material Model M-D / M-SD (Wide Body) | |
| Gross Weight | 39kg |
| Net Weight | 37kg |
| Package Dimension (L × W × H) | 700x510x320 mm |
